Daily maintenance work of CNC machine tool loading and unloading manipulator

When using the machine tool loading and unloading manipulator, it is necessary to pay attention to regularly check whether the operation of the manipulator is abnormal. In daily use, only scientific maintenance and maintenance can make it durable.

1. Moisture anti-rust (plus mineral oil anti-rust)

When using the best-selling machine tool loading and unloading manipulator, it is necessary to pay attention to its moisture and rust prevention, especially for summer or special environment, when the humidity is large, it should be applied with high-quality mineral oil in time, and special gloves should be worn as much as possible when using it to prevent corrosive substances or sweat on the hands from being damaged after contact with it.

2. Clean environmental dust (to prevent wear of guide rails)

During the daily maintenance of the machine tool loading and unloading manipulator, special attention should be paid to the cleanliness of its working space environment. Once there is more dust in the space environment, it will enter it, which will increase the wear degree of the guide rail, affect its positioning accuracy and service life, so it is necessary to clean the space environment as a whole on a regular and timely basis.

3. Regular lubrication (reduce friction)

Depending on the type of machine tool loading and unloading manipulator, the frequency of lubrication and the requirements are different. However, the vast majority of manipulators need to be lubricated regularly, which can make the equipment run more stable, reduce the friction between various parts, and effectively reduce it

4. Debris cleaning (to ensure performance continuity)

When grabbing special substances, such as gyro-type substances, materials or dust may enter the inside of the machine tool loading and unloading manipulator, which will greatly reduce its working performance, so it is necessary to clean the debris regularly every day. However, the editor reminds to use the correct cleaning method and need to be operated by professionals.

6. Circuit overhaul (reduce the damage caused by the circuit)

If the machine tool loading and unloading manipulator is idle, please unplug the power supply in time to prevent the current from damaging the internal circuit of the manipulator and reducing its life.