How can CNC lathe manipulators effectively avoid damage

There are many CNC lathe manipulators on the market, and for many enterprises, it is crucial to choose a high-quality CNC lathe manipulator. If used properly in normal times, the CNC lathe manipulator can generally be used for 8-10 years, during which it is very important for CNC maintenance. It has a good protective effect on the property of the enterprise.

Many manufacturing enterprises have introduced CNC lathe manipulators, but they have not achieved the desired results, and they have invested more in manipulator maintenance. So, how should we effectively avoid damage to the CNC lathe manipulator in use?

As a manufacturing enterprise, the use of lathe manipulator is the only way to reduce the dependence of enterprises on labor, reduce production costs, and achieve sustainable development. However, many enterprises lack daily maintenance awareness and professional knowledge after the introduction of lathe manipulators, resulting in varying degrees of damage to the manipulators, resulting in increased operating costs. In fact, as long as we use it properly, the CNC lathe manipulator can be used for more than ten years.

The following points must be noted

1. The most basic thing is the correct installation of the CNC machine tool manipulator, and people should also pay more attention to the installation of the CNC machine tool manipulator, which is necessary to ensure that the installation of each component is in place. Incorrect installation not only affects the appearance, but also causes failures in the process of use, and the service life will be greatly reduced.

2. We need to see with our eyes and hear with our ears. Checking and listening for certain signs of wear or adjustment can go a long way in keeping the gripper running optimally.

3. After the lathe manipulator has been running for a period of time, it is necessary to stop the operation of the CNC lathe manipulator to release the heat generated by the CNC lathe manipulator to achieve the goal of cultivating the life of the manipulator.

4. If you are in this kind of wet environment for a long time, the lathe manipulator made of iron is very easy to breed a rusty environment. The rusty CNC lathe manipulator not only makes a big buckle in appearance, but also pollutes the product of the manipulator and affects the quality of the lathe manipulator. Therefore, it is necessary to use the lathe manipulator in a relatively dry environment and dry the lathe manipulator regularly.

5. Carry out regular cleaning work to keep the guide rails and bearings at all shafts clean and good lubrication performance.

6. In the case of high-speed operation, the vibration frequency may be very high, and it is best to install the manipulator on the support structure independent of the molding equipment.

7. Ensure the safety of the wiring tie and the reasonable installation of the cable.

8. Always refer to the manipulator manual for reasonable lubrication of metal parts.

As long as the above points are done, it is very good to prevent and avoid losses.